Drew 0 Posted November 3, 2011 FYI, I'll be going to the Red event to watch the unveiling of scarlet. Remember ordering starts @ 7pm PST. EDIT: The official Red Scarlet-X website is here. All tech specs are on the page. Prices are $9750 for Aluminum EF mount, $11250 for Ti PL or Ti EF mount (body/brain only!) Available now! Share this post Link to post Share on other sites
jonny shaw 16 Posted November 4, 2011 The site has gone nuts, can anyone get on reduser to see what expected shipping is? I don't really fancy ordering and then having to wait 6 months to get the camera. Share this post Link to post Share on other sites
Drew 0 Posted November 4, 2011 Opps I guess none of my posts from Red Studio came through? Darn Verizon 4G! Sorry I didn't check... had to rush for dinner! Anyhow, 4k at 30fps, 3k 48fps, 1080p at 60fps, 1k at 120fps all with window crop from 5K (12fps) S35...meaning each will be considerably narrower FOV. The Ti mount is going to be awesome but a few Epic people are having trouble with reliability. Like R1, I think it's going to be beta firmware on production units. That's the price of getting into the party of cheaper cinematic cameras. Still very excited. Jon if you ordered immediately, they start deliveries in a few days but no idea what the schedule is like. I know the 3 guys next to me ordered once 2 each, so I think the demand will be strong. First come first served! Share this post Link to post Share on other sites
Drew 0 Posted November 4, 2011 Oh yes HDRX at up to 25fps in 3k only. Looks pretty amazing. I think it's Epic lightweight division! Share this post Link to post Share on other sites
SimonSpear 65 Posted November 4, 2011 LOL when RED said they were bringing a Bazooka to a knife fight for once they really were not exaggerating! Makes the Canon announcement look rather lame... Share this post Link to post Share on other sites
jonny shaw 16 Posted November 4, 2011 Have you ordered one Simon? Drew, what about you? Share this post Link to post Share on other sites
SimonSpear 65 Posted November 4, 2011 I've just ordered mine. Delivery date....... UNKNOWN RED Europe said they'd taken 150 orders this morning so there will be some back ordering. Pay 10% deposit now then the balance 10 days before shipment which wasn't so bad IMO. Now how do I enhance my Advent Calender to countdown to my Scarlet X delivery?! Share this post Link to post Share on other sites
DeanB 19 Posted November 4, 2011 I've just ordered mine. Delivery date....... UNKNOWN RED Europe said they'd taken 150 orders this morning so there will be some back ordering. Pay 10% deposit now then the balance 10 days before shipment which wasn't so bad IMO. Now how do I enhance my Advent Calender to countdown to my Scarlet X delivery?! Nice one ... Hope you have enough blue chip work lined up for this baby? Otherwise that's just one expensive paperweight/toy!!! Oh can I borrow it ... Dean Share this post Link to post Share on other sites
SimonSpear 65 Posted November 4, 2011 (edited) I hope so too! Actually when you work it out its only a couple of grand more than your EX1 paperweight Edited November 4, 2011 by SimonSpear Share this post Link to post Share on other sites
DeanB 19 Posted November 4, 2011 I hope so too! Actually when you work it out its only a couple of grand more than your EX1 paperweight LOl ... And a bloody waste of money it was too!!! The starter kit for Scarlet without lenses is meant be around £9000 so a tad more than the Ex1 and then you will have to buy Zoe one so that's double bubble... I've given up keeping up with the Joneses even of I had the money to waste ... Again!!! Dean Share this post Link to post Share on other sites
Nick Hope 151 Posted November 4, 2011 You planning to put it in a Gates housing Simon? Anyone know when that's out and if it's supposed to fit both Epic and Scarlet? Share this post Link to post Share on other sites
Drew 0 Posted November 4, 2011 Jon, I've seen 2 Red (Red 1 MX and Epic M) shoots go awry because of firmware/hardware issues (and heard of a few more) so I will not be a Scarlet virgin. They had people taking orders right at the studio but I had dinner plans. Share this post Link to post Share on other sites
Nick Hope 151 Posted November 4, 2011 Also, if you read Howard Hall's Lembeh report, his Red One actually melted, I suppose as heat built up in the housing during those super-long Lembeh dives. I've no idea if the more recent Reds run cooler, or whether housing design can somehow cater for it, but it's worth bearing in mind. Share this post Link to post Share on other sites
SimonSpear 65 Posted November 4, 2011 Not sure if my camera will ever actually make it underwater Nick. I've got lots of ongoing and future topside shooting to do which will make it a pretty busy camera even if it never gets wet. I'd absolutely love to get a Gates for it if the housing works out to be financially viable for me, but based on the cost of the RED ONE housing it may not be. Keeping my fingers crossed though! Cheers, Simon Share this post Link to post Share on other sites
MJvC 9 Posted November 4, 2011 Does any one know if the dimensions match those of the epic. They sure look similar. Hope that it fits into the gates epic housing. Share this post Link to post Share on other sites
Drew 0 Posted November 4, 2011 Mark, it looked and felt a tad narrower and shorter but weighed the same (HEAVY!) so it may be just my tired eyes. I didn't really play much with it since I had to run for dinner. Share this post Link to post Share on other sites
MJvC 9 Posted November 4, 2011 16 bit - 4k @ 30 fps @ 440 Mb/s for $20 000 is quite impressive add to that the Canon 8-15mm and I think it will be a winning underwater rig with some help from Gates ??? Share this post Link to post Share on other sites
Steve Douglas 16 Posted November 4, 2011 Just remember that the original Red One was also supposed to have a relatively brief waiting period. Mark Thorpe was one of the first 100 to receive one, (he had it sent to me to hold on to for a few months) and he waited for quite a bit longer than those who ordered had been told. I wouldn't expect delivery very soon. I can only imagine what the housing will cost since, with monitor, the Gates housing for the EX1 is about $20,000. You guys are too rich for my blood. Wish it weren't so. Steve Share this post Link to post Share on other sites
Drew 0 Posted November 4, 2011 If it doesn't overheat. Imean if the 7D and 5D2 overheat, what chance does the Scarlet have of being cooler? My personal preference is to get a custom housing so I can fit a Ki Pro Mini or Atomos Samurai in there. Then one can do everything in Pro Res proxy then convert from R3D later. R3D requires Red Rocket to transcode otherwise it's a looooonnnnnggggggg process even on 12 core computers! Share this post Link to post Share on other sites
MJvC 9 Posted November 4, 2011 The Pics of the gates housing from DEMA look like there is quite a lot of space inside. I am sure it is for heat dissipation but maybe one could fit an Atomos in there. Can they be set up to only record when the camera records Share this post Link to post Share on other sites
SimonSpear 65 Posted November 4, 2011 I'd bet that Gates are hoping that the Scarlet will fit into the EPIC housing. It would certainly save a fortune on development costs that's for sure. Cheers, Simon Share this post Link to post Share on other sites
jonny shaw 16 Posted November 4, 2011 Done mine ordered as well with a Red mote, I actually thought it was the same body as Epic due to all accessories for Epic being interchangeable with Scarlet, so fingers crossed re a housing, but I have a guy here in Oz who is doing something pretty cool with housings so there could be a few options. If it doesn't overheat. Imean if the 7D and 5D2 overheat, what chance does the Scarlet have of being cooler? My personal preference is to get a custom housing so I can fit a Ki Pro Mini or Atomos Samurai in there. Then one can do everything in Pro Res proxy then convert from R3D later. R3D requires Red Rocket to transcode otherwise it's a looooonnnnnggggggg process even on 12 core computers! Just saw a test with the Samurai and and Epic, and it worked like a treat. Share this post Link to post Share on other sites
MJvC 9 Posted November 5, 2011 Done mine ordered as well with a Red mote, I actually thought it was the same body as Epic due to all accessories for Epic being interchangeable with Scarlet, so fingers crossed re a housing, but I have a guy here in Oz who is doing something pretty cool with housings so there could be a few options. Just saw a test with the Samurai and and Epic, and it worked like a treat. Hey Jonny Is there footage of that test some where online or did you see it first hand. Thanks Mark Share this post Link to post Share on other sites
jonny shaw 16 Posted November 5, 2011 Sorry wasn't mine, it was being used on a TVC, but it looked good. Share this post Link to post Share on other sites
MJvC 9 Posted November 5, 2011 1: Can the Atmos Samurai use the SDI Flag to start & stop recording? i.e. start recording when the camera starts to record. Record signal transmitted via the SDI interface 2: Can it also accept external time code? Thanks Share this post Link to post Share on other sites
