Jump to content
Sign in to follow this  
natz

Underwater Ikelite housing body for canon 7d...UK Based

Recommended Posts

Ikelite underwater Housing for Canon EOS 7D (body only)

still in warranty only 8 months old , used only a handful of times, for surf photography. I have the spare parts it came with.

 

I am based in the UK in windsor/LONDON (would prefer to meet in person, or will also post on ebay if shipping is required, which will be at extra cost)

 

 

This unit sells in the uk for £1300 approx.

im looking for £1050, its nearly new so price is fixed.

THANKS

 

 

below is the spec

http://www.ikelite.com/web_two/can_7d.html

 

Depth rating: 60m

Controls for all camera functions exceept multi-controller and flash pop-up. Extension lever on back panel gives ergonomic movie start/stop control.

Interchangeable port system.

Port is supplied separately.(Port choice depends on lens to be used).

Super-Eye long eye-relief viewfinder optic allows full frame viewing with diving mask. eTTL2 conversion circuitry provides full TTL operation with Ikelite DS-series substrobes. Two substrobes can be triggered using a dual sync cord.

Exposure compensation buttons on rear of housing gives ±2 EV control range in TTL mode, or 8 manual settings in ½ EV steps.

 

Non-Ikelite strobes can be used in manual mode only (with appropriate sync cord).

 

Dimensions SLR-DC: With tray: 13.25"w, 8"h, 6.5"d. Without tray: 9.5"w, 6.75" h, including knobs.

Weight: ~3.25Kg, 7.15lb without port. ~3.6Kg, 8lb with port.

Buoyancy: slightly negative (depending on port).

Share this post


Link to post
Share on other sites
Sign in to follow this  

Sponsors

Advertisements



×
×
  • Create New...