escape 84 Posted March 24, 2013 Anybody using this combo? What do I need? (bulkhead & hotshoe). Personally I hate electric wire but friend of mine can't live without it. He want to use ttl converter w/ 5dmk3 housing. Share this post Link to post Share on other sites
Larry C 24 Posted March 24, 2013 This should be what you need, but double check with Ryan at Reef to make sure. http://reefphoto.com/shop/index.php?main_page=product_info&cPath=135_68_51&products_id=5021 Share this post Link to post Share on other sites
famorim 0 Posted March 25, 2013 I started to use that on Aquatica housing last week.. Based on my land tests and also in the swimming pool It worked very well with my canon wired to couple YS-120 strobes... The only issue I found was for small apertures over f/22 where it usually shows under exposures, so I needed to compensate using the TTL compensation dial on this converter. I think it should works on Nautican too if you have the nikonos with 5 pin wired to the bulk head. good luck. Share this post Link to post Share on other sites
