Options for mounting wetlenses on Aquatica 7D macro-port

[MortenHansen 25]

Hi gang!

 

So, I have these two 67mm diopters lying around from when I did a lot of compact photos, and I would like to use them for my Aquatica 7D housing, I have the macro port which allows for manual focus, and I already have the 100mm and 60mm.

 

I have seen that aquatica has an Adapter available, but for me its price wise, a bit over the top, anyone know of cheaper solutions?

 

Or did anyone Macyver something?

 

Any ideas would be much appreciated!

 

-Morten

[E_viking 30]

Hi Morten,

 

Try with Manfred at www.unterwasserkamera.at

 

/Erik

[operam 1]

Morten, here are a few options:

 

-Dyron 77mm adapter for Aquatica macro port with the 67mm-77mm step ring

http://www.dyronstore.com/m77-adapter-for-aquatica-housing-macro-port.html

Depending on whether you have the older or the newer macro port, you might need a different size O-ring for the adapter (the newer port has slightly smaller diameter)

 

-The Glowdive adapter

http://www.glowdive.com/en/lente/index.htm

 

-The Reefnet adapter

https://reefnet.ca/products/subsee/

[MortenHansen 25]

Thanks for the replies!

 

Was just wondering, does the aquatica lens holder actually take 67mm diopters such as the INON UCL165? Or does the holder only utilize the aquatica quick release system?

 

All the best, Morten

[Stewart L. Sy 12]

No. The aluminum holder is only has the quick detach system designed for the Aquatica +5 & +10 wet lenses. The lenses themselves do have 67mm threads

[Cary Dean 3]

http://www.xit404.com/products/index.php?l=product_list&c=63