julieann 0 Posted April 8, 2013 (edited) Almost new housing for Canon 1D Mark III/IV. Downsizing my system. Only two trips taken with this housing, so in great condition. $2,950.00 (Pay Pal accepted). Don't miss this great deal! :swimmingfish: :swimmingfish: Edited April 9, 2013 by julieann Share this post Link to post Share on other sites
r4e 24 Posted April 10, 2013 I might be interested. Sea and Sea manufacture a housing for Canon EOS-1D MarkIII and Canon EOS-1Ds MarkIII. How do you know that your housing would work with a IV? Have you yourself got a Mark IV? Do you get access to the video start button (FEL)? Could you please include pictures? Could you include a picture with a Mark IV inside the housing, but with the back open. I am especially interested can you fit a HDMI cable to connect the camera to an external HD monitor. Share this post Link to post Share on other sites
ericwlo 0 Posted April 10, 2013 I can confirm that a 1d mark iv will fit into a sea and sea housing made for the 1d mark iii. there's no access to the fel button thou Share this post Link to post Share on other sites
julieann 0 Posted April 10, 2013 Hi r4e, It definitely fits either camera. You can't access the FEL button, so you need to press it before getting in the water. I'm not sure about the cable (I only shoot stills), so I don't want to tell you the wrong infomation about whether you can connect it to the external monitor. Do you still want pictures? I also have two bodies (both 1DMark IVs) and the 100mm port that I'm considering selling. Let me know if you'd be interested in any of that and I'll send you prices. Let me know about the pictures...thanks! Share this post Link to post Share on other sites
julieann 0 Posted April 10, 2013 r4e, Do you have an email address where i can email the pictures? I don't think it's letting me attach here... Share this post Link to post Share on other sites
r4e 24 Posted April 11, 2013 Thanks ericwlo for the info. You can't access the FEL button, so you need to press it before getting in the water. I shoot only video u/w. Pressing the FEL button to begin shooting video before placing the camera into the housing is not practical. Whilst recording a video clip on the Mark IV, you cannot anymore adjust WB, ISO, +/- etc. And even if I would be able to guestimate these beforehand, I would be limited by the 30 minute single clip length. Compare this to my dive lengths between 60 and 120 minutes. Sorry, but not practical. Share this post Link to post Share on other sites