Kadu 5 Posted April 14, 2014 Tks Jean, the instructions were well explanatory, and now i am ready to go to the water Share this post Link to post Share on other sites
Kadu 5 Posted May 4, 2014 Omã | Some pictures with OMD-EM1 and Aquatica Housing, with Panasonic 8mm and Aquatica mini dome 5 Share this post Link to post Share on other sites
oktay_calisir 2 Posted May 5, 2014 Here some underwater photography with the Olympus OMD EM1 - Nauticam NA-EM1 - INON Z240's - Panasonic 8mm Fisheye - Mini Dome: http://www.ocalisir.com/photouploads/petcemetery.jpg (yes, the whole system went through that restriction...) http://www.ocalisir.com/photouploads/nahochnahchich.jpg http://www.ocalisir.com/photouploads/descend.jpg http://www.ocalisir.com/photouploads/dosojos.jpg 2 Share this post Link to post Share on other sites
Juzzi 2 Posted May 8, 2014 Hi Chaps... The Austrian 12-50 gear was mentioned in this thread couple of times. Just to let you guys know there is now a cheaper option... and it is prettier also http://www.deepshots.co.uk/2014/04/introducing-missing-bits-by-deepshots/ Regrads Jussi (sorry about the promo) 1 Share this post Link to post Share on other sites
Mooseman1007 0 Posted May 14, 2014 Definately shameless self promotion there Jussi, but as owners of a pair of your gears, ive gotta agree they do work a treat !!! Dave Share this post Link to post Share on other sites
Rajesh 1 Posted June 30, 2014 Anybody know what kind of strobe connections the Aquatica housing will have for the E-M1? Hi, I own an Aquatica housing and used fiber optic cords for the first dives. Works perfect. After some weeks I have an Ikelite connector and works better than expected. You don't have speed sync limits if you know how play with the black band in the top of the frame ( other Oly cameras had this band in the bottom). You can order also Nikonos connectors as you preffer. Some photos with the Aquatica housing and a couple of Ikelite DS161 with FO adapters. https://www.facebook.com/rajeshstudio/media_set?set=a.850501141645403.1073741853.100000565767612&type=3 Share this post Link to post Share on other sites
paratom 1 Posted July 2, 2014 What would be the main differences between the Arctica and Nautican housings? Share this post Link to post Share on other sites
paratom 1 Posted July 8, 2014 Maybe a stupid question - but can you save all the UW-specific settings of the EM1 as a user mode. I wonder if one can switch back and forth between underwater and "overwater/land"-photography quickly? Or is it allways 10 minutes of changing menue-settings? Or is it more usefull to have one body for underwater and one for land-photography? Thanks a lot Share this post Link to post Share on other sites
DivingMeCrazy 2 Posted July 8, 2014 you can save up to four "MySet" configurations. This might be what you are looking for Paratom 1 Share this post Link to post Share on other sites
davirond 2 Posted July 11, 2014 (edited) I confirm what DivingMeCrazy advise. I just made the test, where the underwater mode is assigned to either Fn key in one of MySet preset. The flash fires every time you trigger. When switching to another MySet where the underwater mode is not assigned, the flash doesn't fire anymore. The procedure to configure the E-M1 is provided in the Aquatica AE-M1 user guide (page 6). Another (simpler ?) way to do so is to access the "Direct Control" menu by pressing "OK". Scroll vertically to reach the flash settings and you can choose between always on, red eye reduction, always off, 2nd curtain and manual value (info key + rear dial to change the value by 1/3 step from full to 1/64). Edited July 11, 2014 by davirond 1 Share this post Link to post Share on other sites
