Jump to content
Sign in to follow this  

For Sale: Hugyfot 5DII housing with 3 Hugyfot Ports + 3 Extensions

Recommended Posts

I am selling a full kit for Hugyfot 5DII housing, 2 x 8" dome ports (product number 6.608), 1 x Hugyfot Macro port, extensions 20mm, 40mm, 50mm.
Also the Hugycheck system, TTL circuitry and extra handle.
I also have spare backup TTL flash Controller Board, and Spare Canon Flash Shoe (i.e. spares so that if I ever had a problem on a trip I could replace things and keep going, but I never had a problem, so these are still in their packaging.)

The housing ships with the 2 sync ports. I have a spare third port (which could be used to run an external monitor or for a sound feed, etc).

The hardware for all of these is from the factory and will be included (see attached images). Also some spares O-rings included.

Also have a jumper switch for adjusting the Hugycheck system for high altitude.

I have really enjoyed using this housing it has been reliable, and easy to use.
I have been careful to wash everything thoroughly after each use and it is all good.

There are minor scuff marks on the base of the housing (see images below).

One of the sync ports has a some pitting, but still works fine (see images below taken with 105 macro). The other sync port has minor pitting, see below.

One of the domes has some small scratches (see macro images below) which in my opinion are small enough to not make any difference. In any case they could probably be polished out, I haven't bothered because I travel with a spare dome, which is close to perfect as far as I can see (see images below).
The flat port is also close to perfect (see images below).

This is an adaptable collection of accessories to use many different lenses, I have used Canon fisheye 15mm, Canon 14mm, 16-35mkII, 105mm macro...etc

List of inclusions:

2 x 8" Hugyfot domes (product number 6.608, including neoprene dome covers)
1 x Hugyfot flat macro port
3 x Hugyfot to Aquatica port adaptor
1 x Hugyfot 20mm extension
1 x Hugyfot 40mm extension
1 x Hugyfot 50mm extension
1 x Zoom gear for the 16-35mm lens
1 x Spare 6.627 TTL Flash Controller (unused)
1 x Spare 6.791 Flash Canon Flash Shoe (unused)
1 x Plastic spanner for lock nuts on handles,
1 x Spare Housing O-ring
1 x Spare Port O-ring
1 x Leak alarm
1 x Hugycheck pump
1 x hugycheck system
2 x allen keys
1 x single hand Hugyfot grip
1 x cover for housing port
3 x port covers (as per images)
2 x spare batteries

This is a really well designed system, and this package includes plenty of spares and options.

Any questions let me know.

Asking Price USD $2,900





These scratches are basically invisible underwater.








This is the dome with 3 areas with small scratches



These scratches are shallow, but close to the middle of the dome




This scratch is towards outside of dome.



Hugycheck jumper next to spanner for scale





Edited by mattsea

Share this post

Link to post
Share on other sites

Just to clarify a few things.

Price is $2900 + shipping via (Fedex, DHL - needs to be signed for. Can pay via Paypal)

This is a great deal. The housing has been well used, and has performed extremely well, it is really a great piece of engineering.

The Heinrich TTL circuit (6.687) is fantastic and a lot of other brands of housing don't have anything this, for Hugyfot it is an option which was extra and cost me (USD$271), the backup TTL board option is a different simpler flash controller V2.1 product number 6.827 (I paid $134).

I have tried to show every blemish in great detail so that you know exactly what you are getting.

The pitting on one of the ports looks a bit rough, but in reality it works fine. If it worries you remember you really only need one Nikonas 5 pin port, and this housing has two 5 pin ports, if you are still worried you should know you can easily replace this part yourself.

The scratches on the top viewing area are invisible in water, I have taken the photo in a light that makes them look much worse than they actually are.

The scratches on the backup dome are very small and particularly shallow for the central ones, underwater they are insignificant. If you wanted you could probably polish them out.

I have just been testing everything to make sure it is all working and I noticed that the HugyPump takes a bit longer to pump out the air than it used to, so I will include a hand pump which only takes 3 or 4 pumps to get a vacuum so that the green light comes on. I Left it overnight and there are as usual no leaks. That is what is so great about this housing, you pump it down about thirty minutes or so before a dive, and so long as the vacuum holds the green light stays on. If the vacuum drops then it starts flashing red, so you know before even start the dive whether you have a leak.

A new 5DMKII housing alone now costs USD$3,300 and all the other options I have offered here cost me around another (USD2,700).

So all up this kit I cost me around USD$6,000K and a lot of the items are used but in close to perfect condition.

For the fisheye dome ports (product number 6.608 25/D 174) (I paid USD$530 each => USD$1,060)
The macro Flat Port (6.607 -L 90/D 100) cost me USD$237
The spacers cost around USD$165 each 3 x $165 = $495
Heinrich TTL option $271
Extra handle cost me $107.
The vacuum assembly is $118
Flash Connection 5 pin $118
Gearing $77
etc etc as above

I have offered all this at a good price as my preference is to sell everything together.


Share this post

Link to post
Share on other sites

Also include manual, Hugyfot Towel.


If you are passing through Hong Kong I can meet you and you can test all the gear.

Might also sell my Inon Z240's but only after selling the housing.

If I don't sell it the next week or so, I might get a new flash port and advertise on eBay.


Price reduction to USD$2,500 or Euro1,820 or GBP1,500 (excluding shipping, customs, etc).

Share this post

Link to post
Share on other sites

Hi, if you decide to sell the items separately I'm interested in one fisheye dome port (which one depending on the price), and also 20 or 40 mm extension ring.



Share this post

Link to post
Share on other sites

Message Sent

Share this post

Link to post
Share on other sites

Price has been reduced to USD $2500.


I have priced some additional spares, to replace the pitted splitter bulkhead is 161Euro. The current one still works, but you could get a spare which could easily be changed in the field.


This is a great system for someone.


Last chance before I put it on ebay.

Share this post

Link to post
Share on other sites

I may be interested in the TTL circuit. Pm and we can chat about it.





Sent from my Nexus 7 2013 using Tapatalk

Share this post

Link to post
Share on other sites
I have replaced the split port with a nice new one (cost Euro160), the old one still works so that can be included as a spare.

Still the same price USD$2500.

This is a very nice system to someone with the initiative to jump on a good deal.

(From looking around I think this is easily the best deal out there.)

Share this post

Link to post
Share on other sites

Still for sale $2500 includes shipping via DHL, Fedex or equivalent.

Share this post

Link to post
Share on other sites
Sign in to follow this  



  • Create New...