Help!please!no contact withe left handle L&M bluefin pro oled for canon XA10

[reb 0]

Hello,

 

Sorry if my English is not great ...I've just bought the camcorder Canon XA10 with the housing L&M bluefin pro oled. Since few days,I do not have any contact with the left handle from the housing.So,I can not use the function with the arrows. Please,somebody can help me how to find the solution?

[SwiftFF5 134]

Hi reb, first question, was this a new or used housing? I'm wondering if the housing needs a service, perhaps?

[SwiftFF5 134]

Also, here's a few tips that might be useful for you:

 

https://lightmotion.zendesk.com/hc/en-us/articles/200657014-Troubleshooting-Your-Bluefin-Canon-S30-G10-G

[reb 0]

Thanks a lot, for the advice,i 'm going to check it and let you know.

Thanks you for the advice and i 'm going to check it and let you know...

[reb 0]

I've checked and the right handle has the menu .I don t know how i've done that!!!! no contact with the left handle...the handles switched...do you understand what I mean.

The housing and camcorder have 10 dives when I bought them. Somebody!have a solution?!!!Thanks again for the reply

[SwiftFF5 134]

It is possible that you need to change the batteries.

[SWink 43]

I had some similar issues just recently.

The batteries may need replacing or you may have inadvertently moved the IR sender on the inside left hand side of the housing - this will cause some signals not to be sent to the camera properly

Cheers

Steve

[reb 0]

Hello !Steve!and Swiftff!

Thanks for the reply but still not work. The batteries are ok . Steve! I've checked The IR Sender on the Inside but nothing . I'm getting crazy!!! I still not find a solution...

Cheers,

 

Rebecca