hai07 0 Posted September 2, 2014 (edited) I am selling here my Sea &Sea MDX Pro D3 which is usable for a Nikon D3 as well as for a Nikon D3x. The complete housing was overhauled/maintananced/pressure tested by mike-dive (www.mike-dive.de), who is well known for modifications, repairings and special ideas. He put in a iTTL-Converter so that two strobes can be used together. A manual switch allows you do disable the TTL-Converter by hand outside the housing with a knob. Perfect who likes TTL for Macro. Please see pictures below. For this nice feature we decided to change the S/C/M knob into the TTL-converter knob at the same place. The housing is fitted with a standard viewer, the condition is good for sure it hast the normal markings from usage. Addtional I have: 1 each NX Zoom Port, P/N 51101 no scratches on the front glas 1 each Adpater Ring 40, P/N 56111 1 each SX-Ring, P/N 50261 1 each NC Compact Macro Port, P/BN 56201 1 each Compact Macro Port S (35), P/N 56211 no scratches on the front glas but a small dent in the plastic 1 each NX Fisheye Dome Port, P/N 56401 modified with removabel weights Following gears: 1 each Zoom Ring for Sigma 17-35 1 each USM Zoom Gear for Canon EF16-35 f2.8 1 each NX Sigma Mini Zoom Macro 28-80 f3.5-5.6 HF Focus Gear 1 each NX Sigma Mini Zoom Macro 28-80 f3.5-5.6 HF Zoom Gear 1 each AF Nikkor ED 17-354 f 2.98D Zoom Gear 1 each Zoom Gear for Nikon 105 VR usable allone and with Kenko 1.4 Converter (made by xit404.com) 1 each Sea & Sea Single Strobe Cable 5-pin 1 each Sea & Sea Dual Sync Cable 5-pin 2 Flash-Arms (Combination of Sea&Sea Arm VI with Mike-Dive Arms) A lot of unused O-Rings, spares, grease etc. are included. I am interested to sell everything in one lot, my price is EUR 1100,- for the complete listed equipment. The material is located in Germany and can be packed well for shipment. Edited September 2, 2014 by hai07 Share this post Link to post Share on other sites