Jump to content
Sign in to follow this  
Thoms

How to connect Ikelite end with Nikonos?

Recommended Posts

I figured out that my faulty ttl converter is good enough to be a regular cable like this:

3258-photo-c2b108771eb707b7cf8ad4e3e2e93

so I juts cut off the electronics and left only cables. I worked in manual so this won't do me a problem - even better!

But I've heared that connecting green to green etc. is not enough. Isn't it? Do I need to cross some cables?

Share this post


Link to post
Share on other sites

Use a voltmeter before you cut to translate pin to pin then you won't have to wonder.

Bill

Share this post


Link to post
Share on other sites

Thanks Bill, normaly that wouldn't be a problem but 4 from 5 cables that were inside were cut. Right now I'm just paring by colors ;)

 

nikplug.gifAnd here's what I'm worring about - 3,3k Ohm pin. This shall go to Power TTL?
icsdsbulkhd.gif

Shall I also do that?
nikon_d1x.jpg

Share this post


Link to post
Share on other sites
Sign in to follow this  

Sponsors

Advertisements



×
×
  • Create New...