joez2391 1 Posted November 14, 2015 I have a precision dome port (Ikelite) for my tokina 11-17 fisheye and as i was going to disassemble it for cleaning, I could not remove the modular lens extension tube from the dome port. What would you guys suggest? Would it be dangerous (chance of flooding) if I were to leave it stuck in place without taking it apart to lube the o rings? I have no idea if I'm better off leaving it without risking damage to the dome port or trying to remove it with a rubber wrench. If there is no chance of it flooding as long as I dont mess with it I wont touch it. Please let me know if you have any suggestions! -Joe Share this post Link to post Share on other sites
Cerianthus 55 Posted November 14, 2015 dont have the precision dome but the ikelite one. When it is stuck use the rubber wrench / strap wrench..No problem... http://www.tradecounterdirect.com/add_icon.php?image=http://www.tradecounterdirect.com/custom/images/products/rolson-strap-wrench.jpg Share this post Link to post Share on other sites
joez2391 1 Posted November 14, 2015 the strap wrench worked perfectly, thank you! It wouldn't budge at first so I let the port soak in cold water for a few hours to shrink the plastic a bit and with some force it came off. Thanks again for the suggestion. Share this post Link to post Share on other sites
