Jump to content
tursiops

Scratched my WWL-1 glass

Recommended Posts

Ran into some hard coral...

 

What do I do now? The scratch is about an inch long, right in the center of my lens, and I can see it clearly when I close focus.

Share this post


Link to post
Share on other sites

You can probably get it polished from someone like focal point in Colorado, cheaper than a new one. If you can feel the scratch with your fingernail then it is probably too deep to fix. There are people who think they can do this themselves but they are mostly wrong. I think focal point charges between $200 and $300 to polish such lenses, there are other companies that do it as well.

Bill

Share this post


Link to post
Share on other sites

The dome is made of double coated glass it cannot be polished. You need to send it back to Nauticam for replacement

Share this post


Link to post
Share on other sites

Or fill it with clear fingernail polish, then buff lightly with acetone and a Terry cloth. That's an age-old trick that's worked on auto glass for as long as I can remember. Most UW glass is not externally coated, contrary to popular belief (anti-reflective coatings would go on the INSIDE of the dome, if at all) and if you're already annoyed by the scratchyou have nothing to lose in trying. Worst case, you have to strip the entire exterior glass with the acetone if you do have some rare coating there that is noticeably affected. (Test a corner first)

Share this post


Link to post
Share on other sites

Sponsors

Advertisements



×
×
  • Create New...