Jump to content
Pedro Carrillo

Seacam flashes, ports, cables, zoom rings, PVLs, etc

Recommended Posts

Hi everyone,


Would like to let go the following material listed below (please see my other post for housings -Nikon D200, D300 and D4/D4s- and lenses -Tokina 10-17 and Sigma 17-70-)


Buyer pays shipping, to be done from Spain (Madrid)


Further info and/or photos available upon request.


Thanks for having a look!





2 x Seacam Seaflash 250 TTL: hard to find powerful flashes, including neoprene covers and seacam balls. I also include a DIY screw-in system that allows to use diffusers (x2 made from Gary Fong), snoots (x1), barn doors (x2, not pictured) or grids (x2). All those are included, too, so you will get your hands on a nice UW lightning system. Asking EUR 1,500 each / EUR 2,600 both






2 x Seacam Seaflash 150 TTL: including neoprene covers, Seacam balls, diffusers and 3 batteries. Asking EUR 1,500 each / EUR 2,800 both and I include the extra battery (EUR 200 on a stand alone basis)





1 x Seacam Fisheye port, including lid and neoprene cover. Small scratch that will not show in photos. Old model, with metal shading, indestructible! Asking EUR 600





2 x Seacam S6-S6 cables, asking EUR 180 each


1 x Seacam S6-N5 cable, asking EUR 180


1 x S&S S6-N5 cable (DIY), asking EUR 120


1 x Seacam P90 macro port, including neoprene cover and lid and a Saga double flip diopter adaptor (diopters not included). Asking EUR 400.

I also have a Seacam diopter, available separately. Asking EUR 180




1 x extension ring PVL 70, including lids. Asking EUR 150




3 x zoom rings (Nikkor 12-24 DX, Tokina 10-17 DX and Nikkor 24-70 FX). Asking EUR 100 each




1 x Seacam MPF Systemport 150 (ideal for a DIY project, old housings type of thread - will NOT work with digital housings-) Asking EUR 150

1 x Seacam Domeport DP115 - Asking EUR 200





Share this post

Link to post
Share on other sites

Hi, Pedro,

I'm looking for a Seacam screw-fit dome port to fit my 1994 Seacam housing (which I have to date only been using with a flat port for macro photography). Is your dome port compatible? If so, what lens is it optimised for?

Kind regards and many thanks,


Share this post

Link to post
Share on other sites

Hi, Roger


I am afraid the only port I have with the old thread is the Seacam MPF Systemport 150 (macro port with manual focus gear). All others are bayonet-type, so will only fit modern housings





Share this post

Link to post
Share on other sites



  • Create New...