Jump to content
jgttrey

Nauticam RX100ii Housing + Camera + Tray

Recommended Posts

Hi all,

 

I’m upgrading to a mirrorless setup, so I’m letting this complete package go:

  • Nauticam NA-RX100II housing
  • Sony RX100ii camera with soft case
  • Flexitray II tray and handles
  • 3 batteries (Wasabi brand, with charger, all hold full charge)
  • Two O-rings, one has about 30 dives on it the other is a brand new backup

Housing is in excellent condition. Purely as preventive maintenance, I sent it to Backscatter last May for a checkup to see if service was needed and got a pressure test. No service was required other than I replaced the leak detector which had a broken solder connection. Since then, I’ve put about 30 dives on it and its perfect.

 

The camera is also in excellent condition. Very slight cosmetic mar to on the plastic surround on front of the lens, otherwise unblemished. Glass is perfect and it takes great photos.

 

One note: I bought this set up from the original owner in Australia, so the camera is the PAL version. You can set it to NTSC with no problem, as I have, and it works perfectly. However, when you turn the camera on, you get a splash screen warning that you are in NTSC mode and have to hit the Select button to acknowledge it. It never bothered me, but I want to point it out. If it had, I just would have left in in PAL mode b/c I rarely shoot video.

 

Everything is A-1 perfect function and it takes great photos. It served me very well and I hate to let it go, but it’s time for someone else to enjoy it and I gotta make some room for the new rig.

 

$950, domestic shipping included.

 

Feel free to PM me and I’ll be happy to send you more photos, closeups, whatever, and answer questions.

 

Joe

 

post-51932-0-70774400-1484793648_thumb.jpg

Share this post


Link to post
Share on other sites

Hi I m ınterested only Housing and Tray. Dou you think to sell only housing and tray? İf yes please send me mail about the details langusten@web.de

Regards

Share this post


Link to post
Share on other sites

Thanks guys. The housing and o-rings have been sold.

 

I do still have the camera and tray. I'd sell the camera, with the charger and 3 batteries, for $300 and the tray for $100.

 

For the buyer of the tray, I also have a lanyard I'd sell for another $15, which basically the cost of the materials. If you're familiar with the basic ball mounts for the Flexitray, you'll know they do not come with any provision to attach a lanyard. You can get more expensive ball mounts with attachment points but I couldn't find any other off-the-shelf product. My solution was paracord and stainless snap shackles. It's worked great.

 

Joe

post-51932-0-12538300-1486677793_thumb.jpg

Share this post


Link to post
Share on other sites

Sorry Jeff. I was out of pocket yesterday when you posted. Unfortunately, I only have the camera left now.

Share this post


Link to post
Share on other sites

Yes, I still have the camera. Happy to visit if you want to send me a pm.

Share this post


Link to post
Share on other sites

Yes, I still have the camera, spare batteries and charger. Happy to have it go to a good home.

 

Sent from my SM-G935V using Tapatalk

Share this post


Link to post
Share on other sites

Sponsors

Advertisements



×
×
  • Create New...