Jump to content
robovet

Nauticam 5D M3 kit 3 ports; strobes; arms; everything needed

Recommended Posts

FS: A complete setup for the canon 5D mark 3. I have used this on 4 live aboard trips. One of the YSD1 strobes had it's battery compartment flood, otherwise no other mishaps. The compartment was flushed and a new cap replaced and now works fine. I wish to sell everything as one package, otherwise I will just keep it. The reason for selling is that I don't see myself going on another trip for 2-3 years. We have a Botswana trip planned next summer and then Namibia after that.

 

Nauticam 5DM3 housing

Nauticam m16 bulkhead vaccum system and pump

Optical flash rigger for canon

45 degree Viewfinder

2 x YSD1 strobes and fiberoptic cords

Zen Fisheye 100mm glass port with detachable hood (for canon 8-15 or 14mm)

Zoom gear for 8-15mm canon

Macro port for canon 100mm USM

Nauticam macro converter

Nauticam flip diopter

Bluewater 67 Macro lens

Focus gear for canon 100mm USM

Nauticam 8.5 in acrylic dome port for canon 16-35

Zoom gear for canon 16-35

Nauticam extension ring for Dome port

2 x 8 inch + 2 x 12 inch Ultralight arms and 8 clamps + 6 floats for the arms

Braided rope handle with snaps for housing

 

Again, I will only sell everything together. If you add up the whole kit it would cost over $10,500.00

 

My price is $6000.00

 

 

Here is a link to some images taken with this kit :

 

https://www.facebook.com/marc.laxineta/media_set?set=a.10200158305676554.1073741837.1718563330&type=3

 

 

post-35671-0-55487800-1496777452_thumb.jpg

Share this post


Link to post
Share on other sites

Hu there ..i know you want to sell everything together..but if you want to split im intersting in the 2 x YSD1 strobes and fiberoptic cords and 2 x 8 inch + 2 x 12 inch Ultralight arms and 8 clamps + 6 floats for the arms..thanks

Share this post


Link to post
Share on other sites

(several requests for more images)

 

Here is a link to images. There are no scratches on any of the ports. There are a couple scratches on the housing itself but hardly noticeable.

https://flic.kr/s/aHsm4y9Wzz

Share this post


Link to post
Share on other sites

I'm interested in the housing and ports. Looks like you could sell the strobes, arms and clamps to juanmag, and the rest to me and have everything sold.

Share this post


Link to post
Share on other sites

Out of interest, what is the white handle pump thing? A manual compressor?

 

Sent from my E5823 using Tapatalk

Share this post


Link to post
Share on other sites

Sponsors

Advertisements



×
×
  • Create New...