alessign 0 Posted January 20, 2019 After years of patience and search I've found the housing I always wanted the sturdy Aquatica 3 for NikonWhy? I like velvia and provia underwater and self develop, sort of a direct approach with photographyBut in order to use it properly underwater I need some missing stuff:a shutter speed cap and coupling gears for a nikkor 20mm f2.8The 1st solution is to machine them BUT if someone has spars and most likely interest to sell or contribute sending measures for a good cause I'll be happyAny help or hint is appreciatedCheersAlex Share this post Link to post Share on other sites
onokai 18 Posted March 2, 2019 Hey I found your post -that took me a awhile. yes I'm gathering some stuff for you Mark Share this post Link to post Share on other sites
okuma 64 Posted March 3, 2019 I had that set up. It was built like a tank! Share this post Link to post Share on other sites
Larry C 24 Posted March 3, 2019 There are several outfits that make custom follow focus gears sized to order, inner and outer diameter. I've seen them for less than $50. If the gear can be concentric, and not have to offset the gear from the ring, you might be able to have one made. Some of the delrin ones can even be offset. Share this post Link to post Share on other sites
Larry C 24 Posted March 5, 2019 https://followfocusgears.com/pages/custom-gears Share this post Link to post Share on other sites
