jimj 0 Posted August 22, 2019 Just hoping someone may be able to steer me in the right direction. I am using a nexus housing with a D300. When using a 105 lens I have attached to the port a macro flip holder from Reefnet Subsee with both their +5&+10. I would like to move to the Nauticam SMC 1 and possibly the SMC 2. The problem I am encountering is the port diameter is 102mm and has no internal or external threads. I am looking for some type of holder that will attach to the port and hold the Nauticam lens. The Reefnet holder will not hold the SMC lens securely. While the folks at both Backscatter and Reef have been good no one has been able to get any information from either SAGA or Nexus. I may have to find a new port but looking for a holder to fit the 102 mm diameter first.Hence this posting. Any ideas would be greatly appreciated. Many thanks for reading. Share this post Link to post Share on other sites
bvanant 190 Posted August 24, 2019 Aditech says that Saga makes a flip diopter for Nexus. Their reference number is 117 https://sagadive.com/producto/soporte-abatible-para-otras-marcas-simple/ bill Share this post Link to post Share on other sites
jimj 0 Posted August 24, 2019 Many thanks Bill for all of your help. I will explore this with SAGA. Share this post Link to post Share on other sites
Larry C 24 Posted August 29, 2019 http://www.divervision.com/howshot-m67-mount-base-100-for-100mm3.9-ports-RM67-100P.html?search=M67 mount base 10 Fits 100-104mm Share this post Link to post Share on other sites
bvanant 190 Posted August 29, 2019 Larry's will be a whole bunch cheaper than the Saga. Bill Share this post Link to post Share on other sites
jimj 0 Posted August 29, 2019 Thank you very much. It would seem one way or another I will have luck in getting this to fit my port & thread on the lens. Share this post Link to post Share on other sites
