Jump to content

Recommended Posts

I'm hoping for a little clarification. I just got a set of inon 330s and I'm having a hard time understanding the manual.

Can someone explain the ev control switch and it's use on ttl vs manual.

The advanced cancel circuit switch. Should I have it on the up position only when shooting manual? 

Share this post


Link to post
Share on other sites

Hi,

You are in good company regarding the Inon manual!

For TTL:

Advanced Cancel Circuit button in its "Off" position (i.e. Up).

Main switch set to STTL or STTL low

Ev Control switch in position "B". If this is not exposing correctly, you can use position "A" or "C" to lighten or darken the image respectively.

For Manual:

Advanced Cancel Circuit button in its "On" position (i.e. In).

Main switch set to "M" or Full. 

Exposure control from -0.5 to 16 via EV Control Switch. If in Full mode, the EV control switch does not affect the output.

This should get you going. Cameras can be a little quirky too

Adam

 

 

Share this post


Link to post
Share on other sites
22 hours ago, adamhanlon said:

Hi,

You are in good company regarding the Inon manual!

For TTL:

Advanced Cancel Circuit button in its "Off" position (i.e. Up).

Main switch set to STTL or STTL low

Ev Control switch in position "B". If this is not exposing correctly, you can use position "A" or "C" to lighten or darken the image respectively.

For Manual:

Advanced Cancel Circuit button in its "On" position (i.e. In).

Main switch set to "M" or Full. 

Exposure control from -0.5 to 16 via EV Control Switch. If in Full mode, the EV control switch does not affect the output.

This should get you going. Cameras can be a little quirky too

Adam

 

 

Why couldn't the manual just have said that? Thank you, that was helpful and straightforward. 

  • Like 1

Share this post


Link to post
Share on other sites

Sponsors

Advertisements



×
×
  • Create New...