ikelite 0 Posted January 18, 2005 EV Manual Controller does NOT allow TTL. Confusion may be the strobe MUST be in TTL to accept the predetermined quench signal of the EV Manual Controller, but there is no position that allows TTL dictated by the camera. Share this post Link to post Share on other sites
beivied 0 Posted January 18, 2005 ahhhhhh... thanks, ike Share this post Link to post Share on other sites
fongwee 0 Posted January 22, 2005 Hi bevied, Only saw your post today. Don't really know how well the DS50 works with C5050Z. Thanks for organising the dive. I can only say that the DS125 works well from my limited time on Friday. The only problem is the estimation of the settings. 1st shoot is always off. I think need more practice. Share this post Link to post Share on other sites
lovells19 0 Posted January 26, 2005 the length of the optical cord have to be equal, the cord i've used is not evenly curled up therefore i was having problem with the ttl on that day. previously when i don't curl up the cables, it work wonderful, all my shots in sipadan was shot with optical cord to TTL sensor and camera set to internal flash. didn't have any problem. get the manual controller beivied. TTL would be great if your strobe is used as a fill strobe, or get a Ikelite housing so you can use TRUE TTL Share this post Link to post Share on other sites
