ehlersgrub 0 Posted January 18, 2005 Hi gang, I'm a newby. Have any of you heard about the DS-125 beeping after the strobe has been powered up? I just purchased it new. It beeps about every 12 seconds after it is powered up and ready to fire. The beep is about 1/2 second long and not very loud. The strobe seems to work OK and I have recharged it with no apparent problems. The manual that came with it says nothing one way or the other about beeping. Comments please. Bruce Share this post Link to post Share on other sites
underexposed 0 Posted January 19, 2005 I think what you're hearing is the strobe battery recharging the flash. Mine do that if their not fired to keep them ready for a full flash. Share this post Link to post Share on other sites
davehicks 123 Posted January 21, 2005 I've had ths problem before, and it was caused by a loose or broken pin in the Manual controller. I would look very closely at the pins and connections in the sync cord and it's attachements. You may have a bad connection as well. Dave Share this post Link to post Share on other sites
Kelpfish 15 Posted January 21, 2005 Mine, too, do that all the time. It's normal. Capacitor keeping juiced. Joe Share this post Link to post Share on other sites
