AL N. 0 Posted August 18, 2005 Hello! When I purchased my housing from Adorama, I also purchased an Ike flat port ( 5502.41) to fit the crappy stock 18-55 Canon lens that came with my 20D. I didn’t know what I was doing at the time, (still don’t) but for some reason I went with the Flat instead of the Dome…and all I currently shoot is wide angle shots. I took the flat port to the reef and most all my shots have reflections (of the port?) on my images. Should I try and sell this port, given I don’t shoot macro at this time, or is their any reason I would want to hold onto this particular port? Thanks for any responses, Al Nelson Share this post Link to post Share on other sites
dmoss 0 Posted August 18, 2005 AL, No doubt you have already checked this, but the Ikelite site doesn't show that port compatible with any of the Canon lenses. I may be wrong on that though. It fits the Nikon 60mm macro lens...you might try listing it in the classified section here, as there are a lot of Nikon shooters and the 60mm is pretty popular. Maybe someone will swap you a 5503 port and you'll be set (for the 18-55 at least) Share this post Link to post Share on other sites
AL N. 0 Posted August 20, 2005 David, That's good advice regarding putting the lens on the classified section here. I guess the guy at Adorama was more interested in making a sale rather than helping me get what I needed. I called Ikelite and they were surprised to hear about them selling me that lens for the rig I own...and advised me to get the proper dome...which I did, and I'll be testing it out tomorrow. Cheers Al Nelson Share this post Link to post Share on other sites
