fer_abella 0 Posted September 27, 2005 I have searched the forums about that question but nothing seems to exist. I believe the idea is bad as it will vignette or something worse, but i am unsure. I would like somebody more expert to help me about the correct reasoning or experience. Thank you in advance. It is because i can borrow a Sea-Sea 16mm wide angle adaptor for nikonos from a friend and i do not know if it could be a thing to test. Share this post Link to post Share on other sites
mattdiver 0 Posted September 27, 2005 Actually, James wrote a review on this a while back. This was using Inon mounts, though. Check out: http://wetpixel.com/i.php/full/inon-access...p-dc40-housing/ If you find that you get vignetting with this setup, you can always use the Photoshop Heal tool to correct this on keepers... Cheers, Mat Share this post Link to post Share on other sites
Jolly 3 Posted September 27, 2005 fer_abella, beside optical match, do you have an idea how to mount the Sea&Sea conversion lens onto the housing? If the 16mm doesn't work / vignet, how about the 20mm, should be cheap on ebay. Julian Share this post Link to post Share on other sites
UWPhotoTech 0 Posted September 27, 2005 The S&S 16mm or 20mm can be used with the WP-DC 40. You'll need the S&S DC300 Conversion ring which must be machined to fit the DC 40 Housing. You'll also need to zoom out beyond the 35mm zoom postion in order to avoid the vignetting effect. We can supply and machine the conversion ring for you if you're interested. Share this post Link to post Share on other sites
fer_abella 0 Posted September 28, 2005 The S&S 16mm or 20mm can be used with the WP-DC 40. You'll need the S&S DC300 Conversion ring which must be machined to fit the DC 40 Housing. You'll also need to zoom out beyond the 35mm zoom postion in order to avoid the vignetting effect. We can supply and machine the conversion ring for you if you're interested. <{POST_SNAPBACK}> I could be interested Would i obtain 90% of performance of INON 450$ alternative with a 100$ lens which is also 4 elements in 4 groups, wet changeable and 90+ degrees of coverage? What about the 5.6 aperture?? Share this post Link to post Share on other sites
fer_abella 0 Posted September 28, 2005 fer_abella, beside optical match, do you have an idea how to mount the Sea&Sea conversion lens onto the housing? If the 16mm doesn't work / vignet, how about the 20mm, should be cheap on ebay. Julian <{POST_SNAPBACK}> Mounting it could be done. Is performance what interest me as this can not be improved. If performance were similar to a uwl-100, perhaps i could go that way. Share this post Link to post Share on other sites
