Jump to content
Sign in to follow this  
SParkinson

Hugyfot 7d Housing / Gears with a Tokina 10-17

Recommended Posts

hi all,

 

just got hold of the above and have a problem with the gears mating with the zoom control on the housing. I am currently waiting for an answer from the retailer i purchased this from but thought id ask here in the meantime?

 

the gear i was supposedly sent were GEA-6.511 and SIL-6.500 which are the correct parts i needed.... there was no part numbers however on the packaging so am wondering if what i was sent is not correct.

 

with the gear on the lens, mounted centrally on the zoom ring, then the gear does not engage with the gear in the housing..... if i move the gear on the lens further back (so that it cannot go any further as the manual/auto focus switch is in the way) then it JUST engages the gear.... and i mean JUST.... 1-2mm if that.

 

the gear i was send fits the diameter of the lens and it 16mm in depth... can someone who possibly has the same setup have a measure and see if theirs is the same?

 

..... or failing that, ideas appreciated :)

 

cheers

steve

post-481-0-45145000-1353339250_thumb.jpg

post-481-0-91321100-1353339266_thumb.jpg

Share this post


Link to post
Share on other sites

if no-one has an idea perhaps someone with a GEA-6.511 gear could measure it and let me know how wide their's is please?

 

thanks.....

Share this post


Link to post
Share on other sites
Sign in to follow this  

Sponsors

Advertisements



×
×
  • Create New...