blibecap 29 Posted June 6, 2015 I have acquired an Aquatica housing A5D. The problem is that the tray / saddle for the camera is missing. So I am looking for one. If you have one that you are not using I am interested. If you have one that I can borrow so I can manufacture a replacement I will be glad to pay the shipping both ways. Please help save this housing. I will pay your rent and or deposit if necessary. Share this post Link to post Share on other sites
blibecap 29 Posted June 16, 2015 I have checked several sources with no luck, I have contacted aquticia, backscatter Bluewater and Reef Photo with no luck. can anyone please help??? Share this post Link to post Share on other sites
Shark_feeder 0 Posted June 17, 2015 Hi Bill, I wrote out a lengthy reply in a direct message only to find out you wont except direct messages. So in brief, since I can't paste what I already wrote. How about 3D printing the mount? if you can get drawings from Aquatica or take pictures and measurements I can see what I can come up with. I have a AD5Dmk3 housing and mount, so I have some stuff to go by, if they are close, not sure. Mark Share this post Link to post Share on other sites
jonb 1 Posted July 23, 2015 Hi Blibecap, I have an Aquatica 5d1 housing...and I have the tray. Unfortunately the tray is not spare, as it will render the housing useless, I guess a little bit like the one you have! I can send you some pics if thats useful, and help work out some measurements... Let me know. Jon Share this post Link to post Share on other sites
lylefk 4 Posted July 23, 2015 Strange that Aquatica can't help you. Good luck! Share this post Link to post Share on other sites
blibecap 29 Posted July 24, 2015 Aquatica no longer stocks the part and they are having problems locating the drawing. Share this post Link to post Share on other sites
blibecap 29 Posted July 30, 2015 Hi Blibecap, I have an Aquatica 5d1 housing...and I have the tray. Unfortunately the tray is not spare, as it will render the housing useless, I guess a little bit like the one you have! I can send you some pics if thats useful, and help work out some measurements... Let me know. Jon Hi Jon Yes please send me a few pictures and measurements. I need the following pictures of the tray only. Directly down where the camera sets, the back end of the tray and the bottom of the tray. Measurements please be as accurate as possible. Send high res pictures to BLibecap@gmail.com Thanks a bunch Bill Share this post Link to post Share on other sites
blibecap 29 Posted July 30, 2015 Hi Jon Yes please send me a few pictures and measurements. I need the following pictures of the tray only. Directly down where the camera sets, the back end of the tray and the bottom of the tray. Measurements please be as accurate as possible. Send high res pictures to BLibecap@gmail.com Thanks a bunch Bill Well as things happen, I wanted to let everyone know that Aquatica was able to provide me with the necessary drawings so I can built the part I need to save this housing. A BIG THANKS TO AQUATICIA and a thanks to everyone else who tried to help. Bill Share this post Link to post Share on other sites
